MOVA S20 Ultra
ConceptMOVA · Robot Vacuums · R2385A · 5 problemen
Varianten
| Projectnummer | BOM | Notities |
|---|---|---|
| R2385A | S20 Ultra R2385 Spare Parts BOM List.xls | Standaard variant |
BOM / spare parts
-
S20 Ultra R2385 Spare Parts BOM List
Onderdelenlijst (BOM): S20 Ultra R2385 Spare Parts BOM List. Gebruik bij bestellen van spare parts.
S20 Ultra R2385 Spare Parts BOM List.xls
Bekijk in app
Handleidingen & service
-
Maintenance Manual
Servicehandleiding voor monteurs: onderhoudsprocedures en controles.
R2385A MOVA S20 Ultra Maintenance Manual.docx
Bekijk in app
-
Repair Guide
OEM-document: Repair Guide.
R2385A MOVA S20 Ultra .docx
Bekijk in app
-
Exploded View — R2385A- station-assy
Exploded view / onderdelenschema voor demontage en part-identificatie.
R2385A- station-assy.pdf
Bekijk in app
-
Exploded View — R2385A-robot-assy
Exploded view / onderdelenschema voor demontage en part-identificatie.
R2385A-robot-assy .pdf
Bekijk in app
-
FAQ
Veelgestelde vragen en snelle antwoorden voor dit model.
S20 ultra FAQ.xlsx
Bekijk in app
Error 2: Please move the Robot to a new location to start Error 2
Oplossingsrichting
The side brush may become entangled with foreign matter Fault phenomenon: After the Robot starts cleaning, the voice prompts "The side brush is abnormal, please check and clean the side brush." Detection method: First, check whether the side brush is entangled with foreign objects, then enter the BIT test (within 3 minutes of turning on the phone, press the cleaning button 5 times quickly while holding down the recharge button), enter the side brush test item, and check whether the side brush rotates normally. Repair method:
Error 6: Please check whether the main wheel is stuck with foreign objects and move it to a new position to start Error 6
Oplossingsrichting
The dust box is not replaced Fault phenomenon: When the Robot starts cleaning, the voice prompts "Please help me install the dust box" and the red light of the cleaning button flashes. Detection method: BIT test (within 3 minutes of turning on the phone, press and hold the recharge button while quickly pressing the cleaning button 5 times) to check whether the dust box detection is abnormal. Repair method:
Error 10: Abnormal charging, please try to clean the charging contact area Error 10
Oplossingsrichting
Charging abnormality Fault phenomenon: After the Robot has been charging at the charging station for a period of time, it prompts "Charging abnormality, please try to clean the charging contact area." Detection method: Measure whether the charging pile has voltage output ( based on the test method mentioned in 4.2 above) Disassemble the Robot and check whether the positive and negative wire harness terminals of the base station are loose. Whether the output voltage of the base station is between 19.5V-20.5V. Repair method:
Error 11: Please wait until the battery temperature is normal before using it Error 11
Oplossingsrichting
Battery abnormality Fault phenomenon: When the Robot is charging, the voice broadcast is "The battery temperature is abnormal. Please wait until the battery temperature is normal before using it." Detection method: Place the Robot on the charging station for charging, and a short message will appear saying "The battery temperature is abnormal. Please wait until the battery temperature is normal before using it again." use" Repair method:
Error 12: Please try resetting the system Error 12
Oplossingsrichting
internal error Fault phenomenon: After the Robot is started, the voice broadcasts "Fault, please check the manual or contact customer service" for a short period of time. Detection method: BIT test (within 3 minutes of turning on the phone, press and hold the recharge button while quickly pressing the clean button 5 times) to test whether each function item is abnormal. Repair method: According to the abnormal items in the BIT test, replace the corresponding faulty components.